Icom IC-F2100D UHF Digital Two Way Radio

Description

Icom IC-F2100D is a slim, compact and waterproof high quality digital IDAS licensed two-way radio. Available in 3 versions (no keypad, limited keypad and full keypad) and 2 frequencies (400-470MHz and 450-520MHz). Supplied with an 8-hour battery, anntenna, belt clip and single charger.

Note: Icom IC-F2100D replaces the now cancelled Icom IC-F2000D.

Icom IC-F2100D Includes

Please note that the box contents may differ depending on model selected. But the following is the minimum that will be included with your IC-F2100D radio.

• Icom IC-F2100D Radio Itself (Select Keypad and Frequency Model)
• Icom BP-280 1485 mAh Lithium Battery
• Whip Antenna (FA-SC57U or FA-SC72U, depends on band)
• Icom MB-133 Belt Clip
• Icom BC-213 Single Charger (and Icom BC-123SV Power Supply)
• Basic (Very Basic) User Guide

Also see: Icom IC-F2100D Accessories

Icom IC-F2100D Features

There is absolutely no question that the IC-F2100D is the most feature-rich digital two-way radio on the market today!

• 400–470 (UHF) & 450–520 (UHF2) MHz Versions
• Analogue & digital mode
• 1500 mW large volume audio from Icom custom speaker
• Improved sound clarity
• Compact (52.2 × 111.8 × 24.5 mm; 2.1 × 4.4 × 1.0 in)
• lightweight (240 g; 8.5 oz with BP-279)
• IP67 waterproof and dust-tight protection
• Tested to 12 categories of MIL-STD-810-G environmental tests
• DTMF autodial memories
• 16-position rotary selector
• ON/OFF / Volume knob
• “Shift key” function increases number of programmable key assignments
• 8-14 hours of operating time with supplied BP-279 battery pack
• Eight character alphanumeric display (Limited & Full Keypad Versions)
• Three color LED
• Enhanced Emergency Safety with Built-in Motion/Stationary Detection Sensor
• 16 Channels (No Keypad Version)
• 128 Channels, Eight Zones (Limited & Full Keypad Versions)
• Built-in 2-Tone, 5-Tone, CTCSS and DTCS
• MDC and BIIS Compatible
• 16-Code Inversion Voice Scrambler
• Man Down and Lone Worker Functions
• Channel Announcement
• 16-code inversion voice scrambler
• Radio Stun/Revive/Kill commands (2-Tone and 5-Tone, RX only)
• Radio Stun/Revive commands (MDC, RX only)
• Auto TX function (2-Tone and 5-Tone)
• MDC emergency call with open microphone function (MDC, RX only)
• Man down function
• Lone worker function
• Motion and stationary detection function
• Surveillance function temporarily turns OFF the beep and LED indicator
• Power ON password (for the simple type and 10-key type)
• Emergency key for emergency call
• CTCSS and DTCS tone
• 2-Tone and 5-Tone
• MDC PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), Revive (RX)
• Up to 100 ID numbers and names can be saved to show the alias name, instead of the ID number
• BIIS PTT ID transmission
• Priority scan monitors one or two priority channels while scanning non-priority channels
• Mode dependent scan automatically changes the scan list according to the operating channel
• Power ON scan function
• Talk back timer
• Channel announcement function
• VOX function for hands-free operation
• Audio compander
• Siren sound for security alarm

Icom IC-F2100D Model Table

The IC-F2100D is available in 3 versions (no keypad, limited keypad and full keypad) and 2 frequencies (400-470MHz and 450-520MHz). See the IC-F2000 model chart below.

Icom IC-F2100D Programming

The Icom IC-F2100D is supplied un-programmed as standard. It’s kind of like a computer without an operating system. It just wouldn’t work. But don’t worry… we can program the IC-F2100D as follows:

• To match your ACMA licence as a new fleet: If you’ve bought an ACMA licence recently and don’t have any radios, we can program your new fleet to the frequency the ACMA has assigned you.
• To match your existing radios: Assuming you have an ACMA licence for your existing radios, we can program your new IC-F2100D to match your existing radios.
• Completely Customized Programming: This option covers everything else. Why not call us to discuss your programming requirements.

UHF CB Not Available On This Radio: The Icom IC-F2100D can not be programmed to UHF CB channels as it’s not type approved. If you would like a UHF-CB compatible IC-F2100D-series radio, see Icom IC-41PRO (which is materially similar to an IC-F2100DT but pre-programmed and locked to UHF CB channels).

Do you need an ACMA licence? Contact us for further information and advice on ACMA licensing.

Do you want to program yourself? You can. Icom IC-F2100D, like almost all two-way radios, has some optional programming software and a programming cable that can be purchased for a small additional fee.